1. The mold closure must be carefully checked before the mold is installed, and the mold can be installed within the allowable range of the travel stroke of the punch to make it used within the specified safety range.2. Open the compressed air valve (or oil pump) before starting the friction wheel motor.3. The forging workers must be trained in operation when friction pressure is used in forging.4. Always pay attention to whether the oil pump pressure and air compression are normal PUNCHING AND

A punch is a precision machine. Since the accuracy of a punch is achieved through the accuracy of each part of the punch, the error of any part will expand the accuracy of the punch by multiples. The operating principle of the punching machine: the mechanical punching machine is driven by the electric motor to drive the flywheel to accumulate the force. The flywheel transmits the force to the crankshaft, and the crankshaft converts the force of circular motion into the force of vertical motion.

The hydraulic press adopts a self-developed double dead-cycle servo system control method, which is highly user-friendly, full-process automatic, intelligent and powerful. Hydraulic press, hydraulic skills and their influence hydraulic skills are the key foundation skills to complete modern transmission and control One of them has become an important technical foundation for industrial machinery, construction machinery and the world's top products. It is their key skills for the direction of

At present, the vacancy in this aspect of domestic automation equipment is still very large. Based on the actual production conditions of different manufacturers, domestic machine tool manufacturers still need to continuously improve in technological innovation and development to enhance their own strength. Automation itself contains many aspects. It is not just a simple machine loading and unloading device, but also needs to understand the process, know the balance of the beat, the planning of