Punch operation in which workers should pay attention to safety procedures

First, check whether the moving member before flushing the working oil. Then begins the punch and check the clutch, the brake is normal, and run the machine empty 1-3 minutes, when operating the machine fault is prohibited.

Second, when the die replacement, turn off the power to start the installation, commissioning Punch PHYSICAL portion before and after the shutdown.

Third, after the completion of installation and adjustment, the pointer moves flywheel washed twice again, she began to check and correct before reporters.

Fourth, we must wait for all other persons from reporters working area, and debris began to take away the power of the actuator table before impact.

Fifth, the movable punch, punch a person transport material, an electrical construction or others can not press the foot switch plate, rather than the hand or hands into the working area reporter punch member moving the contact operation.

Sixth, when the stamping is banned from coming to the slider to the work area, your hand is prohibited in the workplace. Taken in the mold, the tool must be used during normal playback of the workpiece.

Seven found Press machine malfunction or abnormal noise, immediately turn on the power switch is selected.

Eight, the focus must be in when you want to work, not chat, mutual cooperation, in order to ensure safe operation.

Nine, the working class can not punch operators work more than eight hours of continuous work, not irritable, tired state, in order to avoid accidents

Open tilting pressure difference between the fixed station and the?

Presses inclined open frame cast structure, easy to scrap from the mold or stamping down the inclined slide. Positive clutch switch bond, having a single and continuous operation modes. Using a band brake, with a slider type fuse, fuse overload when in a folded state, in order to ensure that the machine is not damaged pulverized. This machine has versatility, high precision, reliable, convenient operation. Equipped with automatic feeding device may be a semi-automatic stretching operation.

Open press bed with high precision, reliable, easy to operate; may be provided with an automatic feeding device, in order to achieve semi-automatic stretching operation. Suitable metal sheet cutting, stamping, punching, bending, drawing and other cold stamping process a shallow, widely used in various industrial manufacturing.

feature

1. rigidity, accuracy and stability.

2. Transmission balance, low noise.

3, sensitive, safe operation.

4. oiled, clearly marked.

Automated production of high efficiency.