Seven simple steps CNC punch press

1. Before closing the mold for the die must be carefully examined to adjust the stroke of the punch travel permission to be within the scope of the die, provided with safety at its specified range.

2. The device starts to open during the first compressed air valve (or pump) in the open friction wheel motor.

3. The training operation must work at the time of forging the forging pressure friction.

4. The work always pay attention to the pump pressure is normal and compressed air

5. Before the operation of the machine strict inspection nutation positioning device, the die loose cushion is intact and the like.

6. Flywheel presses allowed for adjustments or other extraneous matters mold installation.

7. Work order to close down against the stationary punch when completed.